Husqvarna WH4817EFQ2 Manuel d'utilisateur télécharger pdf (Page 51)

English-49

LUBRICATION

Lubrication

Lubrication Schedule

General

Remove the ignition key to prevent unintentional movements during lubrication.

When lubricating with an oil can, it skould be filled with engine oil.

When lubricating with grease, unless otherwise stated, with a high grade molybdenum disulfide grease or

another chassis or ball bearing grease offering good corrosion protection should be used.

For daily use, the machine should be lubricated twice weekly.

Wipe away excess grease after lubrication.

It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this

happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it must be

replaced. Gasoline or other petroleum products must not be used to clean belts.

8011-67

Lubrication schedule

Lubricate with grease gun

Oil change

Filter change

Lubricate with oil can

Level check

12/12 Every year

1/52 Every week

1/365 Every day

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 71 72

Pas de commentaire

Husqvarna WH4817EFQ2 Manuel d'utilisateur Page 51