Husqvarna WH4817EFQ2 Manuel d'utilisateur télécharger pdf (Page 53)

English-51

LUBRICATION

3. Belt Adjuster, Mower Deck

Remove the plate (four screws) and lubricate

with a grease gun, one zerk, until grease is

forced out.

Use only good quality molybdenum

disulphide grease.

Grease from well-known brand names

(petrochemical companies, etc.) usually

maintains a good quality.

4. Outer belt wheels

Lubricate using a grease gun, one zerk, until

the grease squeezes out. Lubricate on both

sides.

Use only good quality molybdenum

disulphide grease.

Grease from well-known brand names

(petrochemical companies, etc.) usually

maintains a good quality.

5. Throttle and Choke Cables, Lever

Bearings

Lubricate the cable ends at the carburetor

with the oil can. Move the controls to the end

points and lubricate again.

The throttle cable is also lubricated at the

control when the control console is removed.

8011-57

The belt adjuster grease zerk

IMPORTANT INFORMATION

Be spartan and remove excess lubricant so

that is does not come into contact with

belts or belt pulley drive surfaces.

8011-432

Lubricating the outer belt wheels

8011-605

Throttle and choke cables by the carburetor

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 71 72

Pas de commentaire

Husqvarna WH4817EFQ2 Manuel d'utilisateur Page 53