Husqvarna 924SBE Manuel d'utilisateur télécharger pdf (Page 10)

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of

the snow thrower, is controlled by the traction drive control

lever located on the left side handle.

• Squeeze traction drive control lever to handle to en gage

the drive system.

• Release traction drive control lever to stop the forward

or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed

control lever.

• Press downward on the speed control lever and move

lever to de sired po si tion BE FORE engaging the trac-

tion drive control lever. Be sure lever springs back and

locks into desired position.

CAUTION: Do not move speed con trol le ver

when traction drive control lever is en gaged.

Damage to the snow thrower can result.

• Slower speeds are for heavier snow and faster speeds

are for light snow and transporting the snow thrower. It

is recommended that you use a slower speed until you

are familiar with the operation of the snow thrower.

OPERATION

CLEAN-OUT

TOOL

FIG. 15

MOUNTING CLIP

DISCHARGE CHUTE

TO THROW SNOW (See Fig. 14)

The auger rotation is controlled by the auger control lever

located on the right side handle.

• Squeeze auger control lever to handle to engage the

auger and throw snow.

• Release the auger control lever to stop throwing snow.

HIGH

POSITION

CHUTE

DEFLECTOR

LOW POSITION

KNOB

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be-

come clogged with ice and snow. Use the clean-out tool

to dislodge this blockage.

When cleaning, repairing, or in spect ing, make

certain all controls are disengaged and the au-

ger/impeller and all moving parts have stopped.

Disconnect the spark plug wire and keep the

wire away from the spark plug to prevent ac-

cidental starting.

• Release the auger control lever and shut off the engine.

• Remove the clean-out tool from it's mounting clip.

Grasp the tool firmly by the handle and push and

twist the tool into the discharge chute to dislodge the

blockage.

After the packed snow has been dislodged, return the clean-

out tool to it's mounting clip by pushing it into the clip.

• Make sure the discharge chute is pointed in a safe direc-

tion (no vehicles, buildings, people, or other objects are

in the direction of discharge) before restarting engine.

DRIVE SPEED

CONTROL LEVER

TRACTION DRIVE

CONTROL LEVER

FIG. 16

AUGER

CONTROL

LEVER

FIG. 14

• Restart the engine, then squeeze the auger control lever

to the handle to clear snow from the auger housing

and the discharge chute.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Husqvarna 924SBE Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Husqvarna 924SBE