Husqvarna 8024ST Manuel d'utilisateur télécharger pdf (Page 14)

MAINTENANCE

LUBRICATION CHARTGENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items

that have been subjected to operator abuse or negligence.

To receive full value from the warranty, operator must

maintain snow thrower as instructed in this manual. Some

adjustments will need to be made periodically to properly

maintain your snow thrower.

All adjustments in the Service and Adjustments section of

this manual should be checked at least once each season.

• Once a year, you should replace the spark plug and

check belts for wear. A new spark plug will help your

engine run better and last longer.

• Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM)

parts to service this unit. Failure to do so can cause the unit

to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1. Check engine oil level.

2. Check for loose fasteners.

3. Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICA-

TION CHART”).

SAE 30 Motor Oil

See “ENGINE” in

Maintenance section

Engine oil

Pivot points

SNOW THROWER

Always observe the safety rules when performing any

maintenance.

TIRES

• Maintain proper air pressure in both tires (See “PROD-

UCT SPECIFICATIONS” section in this manual).

• Keep tires free of gasoline and oil, which can harm

rubber.

NOTE: To seal tire punctures and prevent flat tires due to

slow leaks, tire sealant may be purchased from your local

parts dealer. Tire sealant also prevents tire dry rot and

corrosion.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Husqvarna 8024ST Manuel d'utilisateur Page 14