Husqvarna HEDGE TRIMMER ATTACHMENT Manuel d'utilisateur télécharger pdf (Page 8)

8 – English

ASSEMBLY

Fitting the hand guard and loop

handle

1. Loosen the clutch sleeve’s

two mounting bolts and

dismantle the clutch sleeve.

2. Assemble the hand guard

and loop handle by

screwing them together.

Take care to align the holes

in both parts.

3. Slide the loop handle and

the hand guard onto the

shaft.

4. Slide the spacer into the

slot in the loop handle.

5. Fit the nut and bolt. Do

not over-tighten.

6. Adjust to give a

comfortable working

position. Tighten the nut.

NOTE! The loop handle

and hand guard must not

be fitted behind the arrow

marked on the shaft.

7. Fit the clutch sleeve and

tighten the two mounting

bolts.

Fitting the cutting attachment

Lay the hedge trimmer on a flat

surface before fitting the

cutting attachment. Otherwise

the cutting attachment may not

be fitted straight.

1. Fit the cutting attachment

to the shaft.

NOTE! Make sure the

drive shaft on the shaft is

aligned with the cut-out in

the cutting attachment.

2. Tighten the lower screw,

followed by the upper

screw.

Control before starting

• Inspect the working area. Remove objects that can be

thrown.

• Check the blades. Never

use blades that are dull,

cracked or damaged.

• Check that the hedge

trimmer is in full

working order. Check

that all nuts and bolts are

tightened correctly.

• Check that the blade guard is not damaged or distorted.

• Replace the blade guard if it is bent or damaged.

• Make sure the gearbox is lubricated correctly. See the

section ”Lubricating the blades”.

• Ensure the blades always stop when the engine is idling.

• Only use the machine for what it is intended for.

• Ensure that the handle and safety functions are in order.

Never use a machine that lacks a part or has been modified

outside of the specifications.

START AND STOP

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Husqvarna HEDGE TRIMMER ATTACHMENT Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Taille-haie électrique Husqvarna HEDGE TRIMMER ATTACHMENT