Husqvarna 18 ProFlex Manuel d'utilisateur télécharger pdf (Page 33)

English – 31

MAINTENANCE

Dismantling the belt

Starting point when dismantling the belt:

• No unit attached to the Rider.

• The front of the belt is hung around the hook

guard’s handle.

How the front of the belt is removed from the front

belt pulley is evident from sections 5–8, on page 27.

The entire belt is only dismantled as set out below,

when the snow plough is fitted on the Rider.

1. Dismantle the steering plate under the support

wheel. Use two 13 mm socket spanners.

2. Unhook the spring on the blade brake.

3. Pry off the belt from the intermediate pulley and

remove the belt.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

Husqvarna 18 ProFlex Manuel d'utilisateur Page 33